If you are lucky, you can get to scout the location of the fireworks in advance. If really lucky, you can scout it during the day and during the evening. You will want to look for clean views with no overhead electrical wires or street lights or other clutter.

Once it is dark out, it gets difficult to see clutter items like this until you look at your photos when you get home. That’s when you see these annoying black silhouettes blocking out some of the firework display, or the yellowish green glow of a street light contaminating the darkness.

You will want to see if there are landmarks you can use to establish a setting and help tell a story. Look for bridges, distinctive buildings, landmarks like the Seattle Space Needle, the Sydney Opera House, or other towers that can give a sense of place.

Try to anticipate the wind direction. In a large fireworks show there will be a lot of smoke building up as the show progresses. If you know the general wind direction, you can try to be in a location that is upwind from the display or where the wind blows across getting the smoke to move off to the left or right and not cloud the image.

Considering the smoke issue, it is often best to get your wide, establishing shots near the start of the show before too much smoke builds up. As the show goes on the displays often get bigger and more varied. As that happens you might want to zoom in or switch to a longer focal length lens to take more “close-up” “portraits” of the fireworks.

The next thing to consider is…



This is the time to dust off the tripod that you always promise yourself you will use some day. If you don’t have a tripod, look for other ways to steady your camera. Maybe a beanbag on a fencepost or a tree stump. We’ll talk about gear in a few minutes on another slide.

It also helps to have a remote shutter trigger of some sort. This could be a cable release (which are usually electronic) or a radio trigger (gets expensive). A simple remote release is all you really need. Most have a way of locking the button, too, which we will talk about when we get to Exposure.

Another item related to stabilizing is to get your focus set and locked, especially on compact or point and shoot cameras that may have shutter lag (where the camera takes a second after you press the button to focus and fire.

If your camera has manual focus, use the first burst or two of the show to get the camera focused and lock it there.

Now comes the easy part…



Yes, this is probably the easiest part. For many people the first thought might be that the fireworks are happening at night in the dark. They start thinking about raising the ISO or needing a fast lens. Fireworks are bright! You don’t need a high ISO setting. Go for ISO 100 if available. 200 if that is the lowest your camera can set. And you need to stop down the lens.

The exposure is going to be mostly controlled by your aperture (f/stop). Typically, the recommendation has been F/8 at ISO 100. But fireworks have been getting bigger and brighter, so I now find myself using f/11 and sometimes f/16, depending on the brightness. This is the time you might want to take a look at your LCD between frames to see how it looks (this is sometimes called “chimping,” if you also say, “ohh, ohh, ohh” at the beauty of the shot while looking at the LCD). But don’t spend too much time looking, as you may miss some great exposures. Take a quick peak and determine if the fireworks are too bright or not bright enough and make aperture changes to compensate. This is a time you need to rely on your LCD. A light meter isn’t going to help out here. If they’re too bright, stop down the lens (go to a larger aperture number, which is a smaller aperture i.e., from 11 to 16 or from 16 to 22). If they are not recording bright enough, open up to a lower number (larger aperture). This is another one of those situations where there is no one correct answer. Expose to your taste.

The shutter speed will control the duration of the fireworks exposure. Do you want to capture the streak of the firework being launched along with the burst? Do you only want the burst? Do you want to combine multiple bursts in one photo? These are the things controlled by the shutter speed.

There are a variety of ways to handle this. You can try using 1/2- to 1-second or longer exposures. Open the shutter as the firework streaks upward. But for more control, use the BULB setting on your camera, if available. Bulb is usually available on SLR cameras (digital or film) and high end mirrorless and compact cameras. It might not be available on other compact or point and shoot cameras.

What Bulb does is it holds the shutter open for as long as you keep the shutter release depressed. This is where the remote shutter release comes in handy so that you can keep the button pushed without the risk of vibrating the camera.

I often get the question, “what doe Bulb mean?” This goes back to the old days of photography. The shutters on old cameras were air activated. There was a flexible tube that ran from the shutter to an air bulb on the other end. The photographer would squeeze the bulb to force air through the tube and that would fire the shutter. Some shutters didn’t offer shutter speeds. They just stayed open as long as the air pressure held them open.

To use the Bulb setting on a modern camera, first find out how to activate it. Some cameras may have a specific Bulb setting on its mode dial (where you select manual, aperture priority, shutter priority, etc.). Some may offer it in the Manual mode when you dial your shutter speed down. Refer to your instruction manual for your camera to see if it is available and how to access it.

Once it is set, have the camera aimed and ready to go. Hold a black card in front of the lens and open press and hold the button on your cable release. The black card now effectively has become your shutter. Move the card away for a second or two to capture the firework, then cover the lens again to stop the exposure. Here is where you can also do multiple exposures. Don’t let go of the shutter button (many cable releases have a lock available). Wait for another burst in the same vicinity, then move the card away for another second or two to capture that burst. You can repeat this a few times, but the more exposures you take this way on the same frame, the more light will build up in the foreground and background. It is a balancing act. Again with no right or wrong answer. You need to experiment with it.

I should also mention flash now. Turn it off on your camera. The flash won’t help with the fireworks (they are already brighter than the output from your flash). But it will tend to annoy the people around you.


First off, you need a camera. Most any camera will work for this. dSLR, mirrorless, compact, point and shoot, even your phone camera can capture something.

Lens choice: A zoom lens comes in handy here. You are probably not going to be able to be running around trying different vantage points. When photographing fireworks you usually find a spot to work from, set up the tripod, and stay there for the duration. A zoom lens will let you change the framing of your shot from wide to close up from that vantage point. The other option is to have a bunch of lenses of different focal lengths. But then you end up wasting time changing lenses and possibly missing great shots.

A good general purpose zoom lens would go from around a 24mm to 100mm full frame equivalent. That would be maybe a 16-85 range on a crop-frame sensor. But, depending on the situation, you may want to go with an even longer lens in the 70-200 range if there aren’t many or any wide shots available. Then all your images would be close ups of the bursts.

A zoom lens can also offer some creative possibilities, such as zooming during the exposure. With a prime lens or a zoom you can try de-focusing the lens during the exposure for interesting shapes of the bursts that make for more abstract images. The downside of this, though, is needing to refocus the lens between shots. You will probably get fewer images, but they may be more interesting.

If your lens offers image stabilization or vibration reduction you will want to turn it off while on your tripod photographing the fireworks displays.

Once you are set with the camera/lens combo, there are a few other items to have on hand. One is a small flashlight to help you with camera settings as it gets dark. Also have your batteries charged and also carry some spares. The longer shutter speeds and bulb setting can deplete the batteries faster, as can cold weather if you are taking New Years Eve fireworks photos in colder areas of the world at that time of year. Also have a large memory card in the camera all ready to go. Format it before the show starts. You don’t want to be changing cards in the middle of the show. Another item you might want is a set of earplugs if you are close to the displays. Fireworks can be very loud (though that is often part of the fun and excitement of them).

Tripods are often a personal choice. You need to find a balance between weight, stability, and portability. The best tripod in the world doesn’t do you much good if you leave it home or leave it in the trunk of the car. Find one that is comfortable for you to carry, set up, and use. Get one that is appropriate for your height. If you are a tall person, you will want a taller tripod. Also consider the heads available. For years I didn’t like ball heads. I wasn’t totally crazy about pan/tilt heads, either. But I found them easier for me to use. What I didn’t like about ball heads was the way the camera was attached away from the ball, extending out the center of gravity. This also necessitated using L-plates to mount the camera vertically. And those could get in the way of battery or memory doors, or of cable attachments. Recently I found two options that mount the camera closer to, actually mount the camera to the ball part and alleviate most of my complaints about ball heads. There are the horizontal joystick series from Manfrotto that are pistol grips and ones from Arca Swiss (Monoball P0 or P1). Like tripods, the head you use is a very personal choice. Try a few out before plunking down the money.

It may also be worth considering weather precautions. I carry a simple plastic camera cover in my bag in case the weather turns. These are available in most camera stores where you get the covers for less than $10.

So, that about wraps things up. Let’s get one more bit of advice from my mom…


Call Now Button